BELIMO® AFB24 Damper Actuator, Control Signal: 2-Position, 2/10 VDC, 0 - 135 Ohm, Fail Safe Mode: Spring Return, 95 deg Rotation, 133 Inch-lb, 24 VAC/VDC, 150 sec Motor, <20 sec Spring, Brushless DC Motor, 5 W Running, 1.5 W Holding, 3 ft, 18 ga Appliance Cable with 1/2 Inch Conduit, -22 to 122 deg F, Metal/Plastic, Zinc Plated
- Manual override
- Direction of rotation: reversible with CW/CCW mounting
- Control input: on/off
- Power rating: 10 VA
- Cut labor costs with simple direct coupling
- True mechanical spring return the most reliable fail safe
- Reverse mount for clockwise or counterclockwise fail safe
- Check damper position easily with clear position indicator
- Overload-proof throughout rotation
- Temporary restrictions in damper movement will not change actuator operation
- Actuator returns to normal operation when restriction is removed (modulating actuators)
- By eliminating internal condensation Golden point breather membrane optimizes performance in harsh airstream environments
- Built-in auxiliary switch is easy to use, offers feedback or signal for additional device (-S models)
- Manual override crank speeds installation
- Need to change control direction do it easily with a simple switch (modulating actuators)
- Microprocessor controlled brushless DC motor increases actuator life span and reliability, provides constant running time(modulating actuators)
- Rugged metal housing withstands rough handling in the mechanical room
- 3 ft appliance cable and conduit connector eases installation
- Double insulated - no need for separate safety ground. A Belimo exclusive (-S, 120 V, 230 89V models)
- Automatically compensates for damper seal wear, ensuring tight close off
Standard/Approvals: cULus Listed, UL60730-1A/-2-14, CAN/CSA E60730-1:02, ISO 9001
Application: HVAC Systems
