ACST24LU1308 Goodman Ceiling Mount Air Handler, 2 Ton, R-32, TXV, 8kw, 25000 BtuH, Multi-Speed ECM 1/4 Hp Blower, 45A, 208/230V, 54-1/5" W x 22-¼" D x 11" H, ⅜" Liq., ¾" Suct., 97 lbs
ACST Series
Goodman Ceiling-Mount Air Handlers
1½ to 2½ Tons
ACST Goodman Ceiling mount air handlers with Thermal Expansion Valves (TXV) engineered for compatibility with R-32 low global warming potential (GWP) refrigerant.
Refrigerant Detection System (RDS)
It is imperative that an R-32 indoor air handler be appropriately matched with an R-32 outdoor unit. All air handlers matched for use with an R-32 system must include the required Refrigerant Detection System (RDS) for R-32 systems. The new ACST air handlers are shipped from the factory with RDS included in the printed circuit board (PCB). The new ACST air handlers are not backwards compatible for use with R-410A systems.
System matched R-32 air handlers are equipped with a sensor in the airflow which is connected to the PCB. When R-32 refrigerant is detected, the PCB will interrupt the cooling and heating demand and keep the blower running until the R-32 refrigerant level detected has fallen below a set threshold.
Zoning Integration Kit
When installing a new or using an existing zoning system or indoor air quality (IAQ) device, as part of an R-32 system, a Zoning Integration Kit (Part Number: 0230K00007) must be installed as part of the leak detection system.
New ACST Matched Ratings
Ratings are available in the AHRI directory.
Product Limited Warranty
All functional parts are covered by a 10-Year Parts Limited Warranty*. For a full description of all warranties applicable to this product, please download the warranty information.
At Goodman, we believe in American dependability. Units are designed, engineered and assembled in the U.S.A.
Product Features
• All-Aluminum tube/aluminum fin coil
• Direct-drive, resilient-mount, multi-speed motor
• Sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 and 10 kW
• High-efficiency evaporator coil
• Quiet operation
• ACST Models: Equipped with a factory installed and fully adjustable TXV for improved performance
• Factory installed casing along with mounting brackets for all tonnages
• Configurable front and bottom return for all tonnages
• Factory installed R-32 sensor designed for the lifespan of the coil
• AHRI Certified; ETL Listed
• Primary/secondary drain connection in a high-temperature plastic drain pan
• Suitable for free-return installation (non-ducted return air)
• Galvanized-steel construction
• Factory-installed pull-type disconnect
• Easy service access
• Optimized for the use with R-32 refrigerant
• Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 1 inch H2O when tested in accordance with ASHRAE standard 193
Accessories
HPSK-01 Heat Pump Shut-off Relay Kit
Louvered Goodman Ceiling Access Panels
CAP-2/2L for ACST18
CAP-3/3L for ACST24/30
