REHAU Rauboard Groove Panel, Single, 48 Inch Length, 6 Inch Pipe Spacing, 1/2 Inch Thickness, 2 sq-ft Floor Coverage, Construction Grade Plywood with 0.015 Inch Thick Aluminum
RAUBOARD heat transfer panels are designed for radiant heating systems for new construction and retrofit installations. These heat transfer panels are used in radiant floor, wall and ceiling heating to efficiently and evenly distribute the heat from REHAU RAUPEX pipe into the room. Panels are installed between the subfloor and the finished floor. Walls and ceilings may be used to increase the heat output of a room, panels are installed between the joists and the wall or ceiling covering in these applications. Panels are screwed to the subfloor or wall/ceiling joists, a small bead of silicone is applied to the groove and then the 10.1 mm RAUPEX pipe snaps into the groove. Radiant floor heating systems are quieter than many other heating systems, but no one can ever guarantee that a heated floor will be noise free. By following proper installation practices and observing all manufacturers recommendations, noise during heating system operation can be minimized.
Application: Radiant Heating Systems
