Magnehelic® 2015 Differential pressure Gage, 0 - 15 Inch WC, 4 Inch Dial, 1/8 Inch FNPT, Connection Location: One Pair Side and One Pair Back, Graduations: 0.5, +/- 2% of FS Accuracy, Die Cast Aluminum, Bezel Case, 20 - 140 deg F, Gray, 4-3/4 Inch W x 4-1/2 Inch H, Includes: (2) 1/8 Inch Rubber Tubing Adapter and (3) Mounting Adapters with Screws
- Bezel provides flange for flush mounting in panel
- Clear plastic face is highly resistant to breakage
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see
- It is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over travel without damage
- Wishbone assembly provides mounting for helix, helix bearings and pointer shaft
- Jeweled bearings are shock-resistant mounted, provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover
- O-ring seal provides pressure tightness
- Helix is precision made from an alloy of high magnetic permeability
- Calibrated range spring is flat spring steel
- Silicone rubber diaphragm with integrally molded o-ring is supported by front and rear plates
- Die-cast aluminum case is precision made and iridite-dipped to withstand 168 hr salt spray corrosion test
- Exterior finished in baked dark gray hammerloid
- Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale
- Small amplitude of motion assures consistency and long life
- Provides undistorted viewing of pointer and scale
Standard/Approvals: GOST-R Certificate, RoHS Complaint
